Designed for filtration and purification in a sterile environment. Fisherbrand™ Sterile PES Syringe Filter features a PES membrane in a polypropylene housing for purification of tissue culture solutions from a standard syringe. 33mm diameter membranes available with 0.2 or 0.45µm pore sizes. X50 SYRINGE FILTER PES 33MM 0.45µM STR

Provides fast and reliable filtration of small to medium volumes, complete with ready-to-connect filter units. Sartorius™ Minisart™ NML Syringe Filters, Sterile eliminate time consuming preparatory work, such as changing out the filter and cleaning the filtration system. X50 MINISART AC 1,2µM STum red

Purifies aqueous and organic solutions. Whatman™ Puradisc 25mm Syringe Filters have polypropylene housings with female luer lock inlet and male luer outlet. X50 PURADISC PES 1.0UM 25MM ST

Filter nonpolar liquids and gases. Chromafil™ Xtra PTFE Syringe Filters with polytetrafluoroethylene hydrophobic membrane. X100 Chromafil Xtra PTFE-20/25

Features PES membrane filter for excellent flow speed and high filtrable volume. Sartorius™ Minisart™ High Flow Syringe Filters: Sterile provide sterile filtration, particle removal and ultracleaning. Independent, ready-to-use syringe filters offer flow rates at low inlet pressures allowing for a correspondingly rapid sterile filtration. X50 MINISART PES 0,1µM 28MM

Use for clarification and sterile filtration of liquids and gases under pressure. Whatman™ Holder for 25mm Syringe Filter is a polysulfone in-line membrane filter holder fitted with a pressure-resistant filter support and a silicone O-ring seal to ensure that the unit does not leak. X10 FP 025/1 FILTER HOLDERS25 MM

Designed for sterilizing and clarifying sterile solutions. Millex™-GP Sterile Syringe Filters with PES Membrane are ready-to-use, syringe-driven units with a unique membrane that results in six times less protein binding. Available in a medical grade unit, with a PES or acrylic tip. X50 Millex-GP 33mm PES .22um Sterile FDA Listed CE Marked

Used for filtration of protein solutions. X50 SYRINGE FILTER PTFE HYDROPHYL 25MM 0.2µM NSTR

For use with Whatman Roby 25 Syringe Filters for Automation (cat. no. 09302128) X8 FILTER VALIDATION-KITROBY 25

Ideal for filtration of organic-based samples. Whatman™ Uniflo Syringe Filter, PTFE Membrane is a disposable, hydrophobic filter unit that will not allow water to pass without high pressures. The polytetrafluoroethylene membrane will also stop aqueous aerosols in gas streams. FILTER REZIST 13/0,45 PTFE

Processes three to seven times more sample volume than filters without prefilter. Whatman™ GD/X Regenerated Cellulose Syringe Filters are specifically designed for filtration of viscous or otherwise hard-to-filter samples with high solids content. X150 SYRINGE FILTER GD/X25 RC 0.2µ

Filter aqueous solutions and media or solvents in sample volumes from 2 to 10mL using Thermo Scientific™ Nalgene™ 13mm Syringe Filters. X100 SYRINGE FILTER,PTFE,0.45UM,13MM

For removing particulates, reducing signal-to-noise ratios and maintaining flat baselines X1000 Millex-HV 4mm Durapore PVDF .45um Non-sterile

For removing particulates, reducing signal-to-noise ratios and maintaining flat baselines X1000 Millex-LG 13mm Philic PTFE .2um Non-sterile

Overmolded polypropylene housing and optimized housing design X1000 Overmolded Millex 13, 0.45m Phobic PTFE, NS(RED)

Employs a hydrophobic membrane that is chemically stable and inert. Whatman™ Puradisc 13mm PTFE Syringe Filters are mainly used for filtration of non-aqueous samples. X2000 13PD 0.45U PTFE

Ready-to-use units for simple, rapid and reliable ultracleaning of small volume samples for the HPLC or GC analysis X50 Vivascience Minisart SRP PTFE/PP non-sterile

Designed for fast and reliable filtration of small to medium volumes. Sartorius™ Minisart™ High Flow (HF) Syringe Filters are complete, ready-to-connect units with a high-flow PES membrane. These 28mm filters are available in sterile and non-sterile options, with a 0.2 or 0.45µm pore size. X500 MINISART PES 0,2µ NON STunsteril (VE=500 Stck.)

Whatman™ Puradisc™ 25mm Polypropylene Syringe Filters may be used for biological sample and HPLC aqueous sample preparation. X50 PURADISC 25 PP PP 0.2UM 25MM

Remove virtually 100% of particulates larger than pore size X50 ANOTOP 25 0.1UM 25MM ST

Constructed of Glass Microfiber. Whatman™ Whatman™ Puradisc 13mm GMF Syringe Filters are hydrophilic with excellent compatibility with organic solvents and strong acids and bases. X500 13PD 0.45UM GMF

Whatman Uniflo Syringe Filters are disposable filter units designed to provide clean filtrate from small volumes up to 100 mL. They are available in a variety of membrane choices with a polypropylene overmold housing, and include both sterile and non-sterile options. X45 Whatman Uniflo 25mm 0.22 PVDF S

Processes three to seven times more sample volume than filters without prefilter. Whatman™ GD/X Sterile PES Syringe Filters are specifically designed for filtration of viscous or otherwise hard-to-filter samples with high solids content. X50 GD/X PES 0.45UM 25MM ST

Designed for ultracleaning of small volume samples for the HPLC or GC analysis. Sartorius™ Minisart™ SRP Syringe Filters are single-use filtration units with a chemically resistant PTFE membrane and male luer slip outlet. Available in 4, 15 and 25mm diameter filters with 0.2 or 0.45 µm pores. X500 MINISART SRP PTFE 0,45µ 15MMunsteril (VE=500Stck.)

Cole-Parmer™ PTFE Syringe Filters are unaffected by most organic solvents, concentrated acids and bases, propellants, and cryogenic fluids. X100 PTFE Nonsterile Syringe Filters, 0.20 micron,25mm diameter

Unaffected by most organic solvents, concentrated acids and bases, propellants and cryogenic fluids. Polytetrafluoroethylene (PTFE) membranes are ideal for sterilization of gas and alcohols; cleaning acids, alkalies, and organic solvents; venting purposes. X50 PTFE STERILE SYRINGE FILTERS 0,2 µM

A 33mm diameter sterile syringe filter with a 0.45μm pore size hydrophilic Polyethersulfone (PES) membrane. X250 Millex-HP 33mm PES .45µm Sterile

Designed for sterilizing and clarifying sterile solutions. Millex™ Sterile Syringe Filters: MCE Membrane are ready-to-use, syringe-driven units that have never been touched by human hands during filter assembly. Feature 0.22, 0.45 and 0.80µm pore sizes; medical-grade filters available. X50 Millex 33mm MCE .45um Sterile FDA Listed CE Marked

Nylon is a hydrophobic membrane that is chemically stable and inert. It exhibits low protein binding, and its main application is filtration of non-aqueous samples. Prior to filtering of aqueous samples, the membrane must be pre-wetted with a water-miscible organic solvent. X500 Whatman Uniflo 13mm 0.45 Nylon

Processes three to seven times more sample volume than filters without prefilter. Whatman™ GD/X Glass Micro Fiber (GMF) Syringe Filters are specifically designed for filtration of viscous or otherwise hard-to-filter samples with high solids content. X1500 GD/X GMF 0.45UM 25MM