Includes 300mL funnel, fritted base and cap, clamp, and alignment sleeve. Glass Vacuum Filter Holders, 47mm are used in vacuum filtration of liquids to produce clarified or particulate-free filtrate or to analyze particulate or biological contamination retained on the filter surface. Glass filter holder assembly

Process samples from an in-line system or pressure vessel with this stainless steel holder. Cole-Parmer™ Advantec 301900 Pressure Filtration Holders maximize flow rates by applying positive pressure to the fluid over a broad membrane surface. 304 SS FILTER SUPPORT 142MM

Designed to support bacteriological analysis and analysis of particulates in water and other fluids. MilliporeSigma™ 47mm Glass Vacuum Filter Holders include a glass funnel and base, aluminum clamp and silicone stopper. Available with PTFE-coated sealing surfaces or a stainless steel filter support. GLASS FILTER HLDR 47MM 300ML FUNNEL

For filtration of gases or liquids at inlet pressures of 20 to 700 bar X6 O-RING SILICONE 2-131

Cannot pressurize unless completely assembled, assuring safe operation ZHE HAZARDOUS WASTE FILTRATION SYSTEM 90MM

Merck™ Millipore™ All-Glass Filter Holder Kit was designed for the filtration of aqueous and organic or corrosive liquids for particulate contamination analysis. All-Glass Filter Holder Assembly with 500 mL funnel, fritted base and cap, clamp, 1 L flask

Vacuum filter aqueous, organic, or corrosive liquids for particulate contamination analysis. Glass Filter Holder W/SS Screen, 90mm

Closed unit for particulate or biological contamination analysis PLASTIC FILTER HOLDER 47MM STERIFIL

Replacement part for the XX1014700/XX5014700 vacuum filter assemblies. Merck™ Base and Stopper for 47mm Glass Vacuum Filter Holders is a borosilicate fritted-glass filter holder base with a silicone stopper that is used to connect the filter assembly to the filtering flask or manifold. Fritted Glass Base For 47mm Glass/Filter Holder With Stopper

Replacement part for models XX1014700 / XX1014730 / XX1514700 vacuum filter assemblies. Merck™ Funnel, 300mL for 47mm Glass Vacuum Filter Holders is a graduated funnel made of autoclavable borosilicate glass. Glass funnel, borosilcate, 300ML

Use to vacuum filter liquids for bacteriological or particulate contamination analysis. Analytical 50ml Ss Filter Holder, 25mm

Provides support for membrane filters used with Millipore™ Analytical Filter Holder Assemblies. Millipore Stainless Steel Support Frits are fully autoclavable. SS SUPPORT FRIT FOR 47MM SS FILTER HOLDR

Replacement part for Hazardous Waste Filtration System SUPPORT SCREEN PTFE COATED FOR HAZ WASTE SYST 142MM

Designed for use with Duran™ Filtering Apparatus X10 DURAN Filter discs, POR.5, D. 10 mm

Designed for use with Duran™ filtration apparatus. X10 DURAN Micro filter candle with narrow tube, 125aD, porosity 4

For vacuum filtration using 96- and 384-well MultiScreen_HTS, MultiScreen™ Solvinert, and Solvinert Deep Well filter plates MultiScreen HTS Vacuum Manifold

Ultraclean or sterilize small volumes of liquids dispensed by syringe X12 SWINNEX 25MM FILTER HOLDER 1

Replacement parts for 90 and 142mm stainless-steel filter holders SUPPORT SCREEN PTFE COATED 90MM

Merck™ Millipore™ Stopper for Vacuum Filtration is designed to replace parts contained in glass vacuum filtration kits or provide for an alternative configuration. Silicone No 8 Stopper 3/8 Hole, 5/Pk

For the ultimate in convenience and safety. Millipore™ EZ-Pak and Microfil System includes ready-to-use, sterile filtration funnels and a unique filtration support to facilitate sample processing.
X150 Microfil funnel + 0.45µm 47mm black gridded EZ-Pak membrane (ester cellulose)

Use to vacuum filter liquids for bacteriological or particulate contamination analysis SS FILTER HOLDER 47MM

Designated by the US EPA as a suitable apparatus for Toxicity Characteristic Leaching Procedure (TCLP) ZHE FITTING LUER 1/8'' NPTF

MV series vacuum filtration devices are made of stainless steel, which is especially suitable for microbiological applications. MV 050A/0 VACUUM FILTERHOLDER 500M

Vacuum-Type Glass Membrane Holder, glass reservoir, 47 mm, 300 ml volume, membrane filter accessories MB HOLDER COMPT47MM G/RES FO

Optimal handling for all MicroPlus and ME membrane filters MANUAL DISPENSER FOR MBRANE

Duran™ glass filter for filtration both during analytical as well as preparative work. X5 DURAN Filter discs, POR.4, D. 50 mm

BIOSART 100 LIFTER

Use Kimble™ Microfiltration Assembly Hardware when filtering large volumes of viscous or proteinaceous solutions to give the maximum flow rate. COMPLETE GLASS FILTRATION SYST. 1L

Stopper, No8, 9/16inch hole

Component for microfiltration assembly BASE VERRE FRITTE POUR 53359