Tanks
Kartell™ HDPE Industrial Tank
Kartell™ HDPE Industrial Tank is useful in everyday laboratory practice and features a comfortable handle with a secure seal-cap following DIN recommendations. X24 industrial tanks HDPE 10 L GL51
Cole-Parmer™ Analtech TLC Tank
TANK TLC DEVELOPING 10X10
Thermo Scientific™ Nalgene™ Heavy-Duty Rectangular LLDPE Tank with Covers
Versatility at a lower cost than stainless-steel tanks. RECTANGULAR TANK W COV. HDPE 7GAL.
Thermo Scientific™ Nalgene™ Heavy-Duty Cylindrical LLDPE Tanks with Cover
Find the right tank to meet your application needs with cylinders ranging in size from 19L to 757L. CYL. TANK W.COVER HDPE 10 GAL.
Thermo Scientific™ Nalgene™ Cylindrical Polypropylene Tank with Cover
Resist stress cracking and increase tolerance to many organic chemicals with this polypropylene tank with Cover, an economic alternative to stainless-steel tanks. Cylindrical tank, PP, 378l, with cover
Thermo Scientific™ Nalgene™ Closed-Dome Polypropylene Tanks
Store, mix and dispense reagents in Thermo Scientific™ Nalgene™ Closed-Dome Polypropylene Tanks. BIOTECH CLOSED DOME TANK PPCO 30GASchraubverschluss
Thermo Scientific™ Nalgene™ Heavy-Duty Cylindrical LLDPE Tanks with Spigots
Nalgene Heavy-Duty Cylindrical LLDPE Tanks include a needle-type spigot installed for draw off. Spigot accepts 5/8 inch I.D. tubing. Tanks are offered in sizes from 19 to 208L.
CYL. TANK W. SPIGOT HDPE 5 GAL.Thermo Scientific™ Nalgene™ Lightweight Graduated Cylindrical LLDPE Tank with Cover
For an economical alternative to stainless steel, choose the Thermo Scientific™ Nalgene™ Lightweight Graduated Cylindrical LLDPE Tank with Cover. Cylindrical Tank LLPDPE 28L (7.5GAL)
Cole-Parmer™ Cylindrical Plastic Tank
LOW PROFILE TANK, LDPE 45L
Thermo Scientific™ Nalgene™ Lightweight Cylindrical LLDPE Tank with Cover and Spigot
An economical alternative to stainless steel, the Thermo Scientific™ Nalgene™ Lightweight Cylindrical LLDPE Tank with Cover and Spigot offers excellent resistance to stress cracking. TANK SPIGOT COVER 26L HDPE
Thermo Scientific™ Nalgene™ Autoclavable Polypropylene Copolymer (PPCO) Lowboys with Spigot
Dispense most liquids, including reagents, distilled water and titrants using these polypropylene copolymer (PPCO) lowboys. They fit into tight spaces and can stack three high. ASPIRATOR POLYPROPYLENE LOWBOYS CAPACITY 15 LITRES(2324-0015)
Thermo Scientific™ Nalgene™ Rectangular Polypropylene Tank with Cover
Significantly reduce evaporation and contamination by using these covered, rectangular tanks, which are offered in sizes from 8 to 114L to meet application needs. RECTANGULAR TANK W COV. PP 6GAL.36x25x25cm, 23L
DWK Life Sciences Kimble™ Kontes™ Rectangular TLC Developing Tanks
Molded glass tanks for development of any size TLC plate up to 20 × 20cm DEVELOPING TANK WITH NONSLIP Lid 20 x 20cm orfour 5 x 20cm plates
Macherey-Nagel™ Measuring Cylinder
X2 Measuring Cylinders (glass) 2
Kartell™ Tank, stackable, HDPE, 46L, 365mm x 595mm x 255mm
stackable tanks HDPE 560x330x255mm 46L
Macherey-Nagel™ TLC Simultaneous Developing Chamber
Develop multiple TLC plates simultaneously. TLC Simultaneous Developing Chambers come with a choice of room for either 2 or 5 plates. TLC-Separation-Chamber for 2 simultaneous separations, 10 x 10 cm plates
Kartell™ Tank with Spigot
Designed to rationalize laboratory and small production line organization. Kartell™ Tank with Spigot gives the opportunity to optomize water, aqueous solutions and solvents availablity in a reduced space. X4 tanks HDPE with spigot 20 L
Justrite™ Rinse tank floor standing, with foot treadle steel yellow 83L
RINSE TANK FLOOR STANDING, WITH FOOT TREADLEsteel yellow83L
Justrite™ Dip Tanks
4L DIP TANK YELLOW
Justrite™ Dip tank for cleaning parts and sub assemblies with HDPE liner steel for chemical resistance yellow 19L
Dip tank for cleaning parts and sub assemblieswith HDPE liner steel for chemical resistance
Kartell™ HDPE Stackable Tank
stackable tanks HDPE 380x280x200mm 20L
Justrite™ Steel Bench Can
4L BENCH CAN W/O BSKT YELLO
Justrite™ Dip tank for cleaning parts and sub assemblies steel yellow 19L
19L DIP TANK YELLOW
Buerkle™ Mixing/Dosing Container
With a wide-neck opening for safe filling. 200L LDPE CONTAINER
Justrite™ Bench can for cleaning parts and sub assemblies steel yellow 1L
BENCH CAN YELLOW (1L)
Kartell™ Spigot for Tank
Constructed of high density polyethylene, making it good for packaging and transporting liquids in the food industry. Kartell™ Spigot for Tank facilitates easy use by allowing the tank to be in a position to stand. X2 tap for tanks 1770 and 1771
Macherey-Nagel™ Developing Chamber
X4 Development chamber 4
Macherey-Nagel™ TLC Micro Kit for Beginners
X1 TLC Micro Set A