Ultraclean or sterilize liquids or gases by pressure filtration FILTER HOLDER 293MM 316SS

Ultraclean or sterilize small volumes of liquids dispensed by syringe X10 SWINNEX 13MM FILTER HOLDERs

Duran™ glass filter for filtration both during analytical as well as preparative work. X10 DURAN Filter discs, POR.4, D. 25 mm

Used for general filtration and is designed to handle up to 500mL of sample liquids for the analysis of particulate or microbiological contamination FUNNEL 300ML WITH GLASS FRIT 47MM

Vacuum filter aqueous, organic, or corrosive liquids for particulate contamination analysis. Glass Filter Holder W/SS Screen, 90mm

Use to ultraclean or sterilize small volumes of liquids dispensed by syringe X100 SILICONE GASKET FOR SWINNEX 25MM

Replacement part for models XX1014700 / XX1014730 / XX1514700 vacuum filter assemblies. Merck™ Funnel, 300mL for 47mm Glass Vacuum Filter Holders is a graduated funnel made of autoclavable borosilicate glass. Glass funnel, borosilcate, 300ML

Designed to collect filtrate directly into a media-style bottle MICROFILTRATION ASSEMBLY ULTRA WAR

Designed to support bacteriological analysis and analysis of particulates in water and other fluids. MilliporeSigma™ 47mm Glass Vacuum Filter Holders include a glass funnel and base, aluminum clamp and silicone stopper. Available with PTFE-coated sealing surfaces or a stainless steel filter support. GLASS FILTER HLDR 47MM 300ML FUNNEL

Convenient filtration system uses presterilized funnels and membranes on lever-action filtration support Microfil funnel dispenser, stainless steel, for Microfil plastic funnel

Closed unit for particulate or biological contamination analysis PLASTIC FILTER HOLDER 47MM STERIFIL

Designed to replace parts contained in glass vacuum filtration kits or provide for an alternative configuration Vacuum Glass Base And Cap, 47mm

For vacuum filtration using 96- and 384-well MultiScreen_HTS, MultiScreen™ Solvinert, and Solvinert Deep Well filter plates MultiScreen HTS Vacuum Manifold

Replacement part for the XX1014700/XX5014700 vacuum filter assemblies. Merck™ Base and Stopper for 47mm Glass Vacuum Filter Holders is a borosilicate fritted-glass filter holder base with a silicone stopper that is used to connect the filter assembly to the filtering flask or manifold. Fritted Glass Base For 47mm Glass/Filter Holder With Stopper

Ultraclean or sterilize small volumes dispensed by syringe SWINNY SS FILTER HOLDER, 13MM

Produced from borosilicate glass and available with a choice of support screen. Whatman™ Vacuum-Type Glass Membrane Holder is suitable for aqueous and organic solvent filtration. The funnel seal ensures that the sample does not bypass the membrane and that particulates are retained on the surface of the membrane. Membrane Holder, Glass Support, 47mm, 300ml volume 1/pk

For ultra-ware microfiltration assembly with stainless steel support STAINLESS STEEL FRIT FOR 5292F

Used for routine filtration of corrosive liquids and removal of particles from HPLC solvents GLASS FRIT 40/35

Recommended for routine filtration analysis of corrosive liquids and the removal of particulates from HPLC solvents GLASS FILTRATION SYSTEM 1000ML

FILTER FLASK 125 ML

Stopper, No5, 3/8in hole

Designed to handle small volumes of liquids for analysis of particulate or microbiological contamination 15ML GLASS FILTRATION SYSTEM 25MM

Use Kimble™ Microfiltration Assembly Hardware when filtering large volumes of viscous or proteinaceous solutions to give the maximum flow rate. FILTRATION BASE SUPPORT

Transfer sterile media aseptically from large containers to small media bottles or culture vessels using the Thermo Scientifc™ Nalgene™ Polycarbonate Filling Bell. FILLING BELL PC

Designed to handle up to 500 mL of sample liquids for the analysis of particulate or microbiological contamination GLASS FUNNEL SS FRIT 300ML

Used for autoclaving with the filter in place and is designed to handle up to 500mL of sample liquids for the analysis of particulate or microbiological contamination 300ML GLASS FILTRATION UNIT 47MM

FLASK 1000ML 40/35

Designed for large volume filtration analysis of corrosive liquids or samples with high particulate loads that would tend to clog a 47 mm diameter filter Microfiltration Assembly with FrittedGlass Support and Ground Joint

GASKET PTFE FOR SYRINGE FILTER HOLDER 13MM

Recommended when filtering large volumes of viscous or proteinaceous solutions to give the maximum flow rate COMPLETE GLASS FILTRATION SYST. 1L