Centrifuges and Microcentrifuges

Falcon 50mL Conical Centrifuge Tubes

Tested to withstand centrifugation of 16,000 RCF in a fully supported rotor with room temperature water. Corning™ Falcon 50mL Conical Centrifuge Tubes are ideal for cell centrifugation; pelleting; separation by density gradients.

Greiner Bio-One Conical Bottom Polypropylene Test Tubes with Screw Cap

For centrifugation and applications that require chemical and thermo resistant vessels.

Falcon™ 15mL Conical Centrifuge Tubes

Tested to withstand centrifugation of 12,000 RCF (polypropylene) or 1,800 RCF (polystyrene) in a fully supported rotor with room temperature water. Corning™ Falcon™ 15mL Conical Centrifuge Tubes are ideal for cell centrifugation; pelleting; separation by density gradients.

Fisherbrand™ Premium Microcentrifuge Tubes: 1.5mL

Available in eight colors or in assorted-color packs.

Eppendorf™ Protein LoBind Tubes

Eppendorf™ Protein LoBind Tubes are specifically designed for use in proteomics or other fields of protein research, where protein concentration tend to be very small and sample recovery is vital for assay results.

Eppendorf™ Polypropylene Protein LoBind Microcentrifuge Tube

Store peptide, antibody or virus samples in these LoBind microcentrifuge tubes. Eppendorf™ Polypropylene Protein LoBind Microcentrifuge Tubes are ideal for work in protein research, mass spectrometry and protein array sample preparation.

Fisherbrand™ Mini-Centrifuge 100-240V, 50/60Hz Universal Plug, Grey

Tool-free rotors and quick-spin options make the Fisherbrand Mini-Centrifuge fast and easy to use. The locking lid is functionally designed to fit in the palm of the hand for easy repeat opening and quick tube extraction. 

Fisherbrand™ Premium Microcentrifuge Tubes: 0.6mL

Flat-top snap caps provide a safe, liquid-tight, reliable seal even with prolonged boiling

Hettich™ Adapter for Carrier no. 1427

Designed for use with Hettich Rotors. Hettich rotors are optimized for continuous duty and long service life

Fisherbrand™ Easy Reader™ Conical Polypropylene Centrifuge Tubes

Imprinted clear black graduations ensure accurate readings

Thermo Scientific™ CW3 Cell Washer

Thorough, reproducible blood cell washing, up to 24 tubes per run with either fully automatic or manual modes.

Eppendorf™ 5804 R Centrifuges with A-4-44 Model Rotor

Use this centrifuge for molecular applications in tubes up to 250mL. Eppendorf™ 5804 R Centrifuges offer additional swing-bucket and fixed-angle rotors and deepwell plate capacity for increased versatility.

Thermo Scientific™ Multifuge X1R Molecular Biology Centrifuge Package

Handle a diverse range of laboratory applications.

Eppendorf™ Cooled Centrifuge 5424 R

Eppendorf™ Cooled Centrifuge 5424 R are the new laboratory standard with a 24 place capacity that makes it suitable for all modern molecular biology applications in tubes.

Fisherbrand™ Low-Retention Microcentrifuge Tubes

Provides a secure seal—even over extended periods. Critical applications where minute sample recovery is important.

Thermo Scientific™ SH-3000 Swinging Bucket Rotor

Process microplates, PCR plates/tube strips and many commonly used centrifugal filtration and purification devices with the Thermo Scientific™ SH-3000 Swinging Bucket Rotor.

Thermo Scientific™ Snap Cap Low Retention Microcentrifuge Tubes

Improve sample recovery without additives or coatings. These tubes offer maximum sample recovery by significantly reducing surface binding.

Eppendorf™ Polypropylene Graduated Microtubes

Use these tubes for safe handling of valuable and toxic samples as well as radioactive substances or DNA. Eppendorf™ Polypropylene Graduated Microtubes feature a hinged lid with a small hook that clips around the rim of the tube.

Thermo Scientific™ Nunc™ 15mL and 50mL Conical Sterile Polypropylene Centrifuge Tubes

These premium, high-quality conical tubes are environmentally friendly, and allow for increased traceability with the largest writing area on the market.

Fisherbrand™ PP Centrifuge Tube

Printed evenly spaced black graduations enhance readability without losing precision. Fisherbrand™ PP Centrifuge Tubes are manufactured with polypropylene for durability.

Corning™ Centrifuge Tubes with CentriStar™ Cap

Features CentriStar™ caps with an easy-on/easy-off flat top and offers advanced ergonomics with wider knurls and roll-over edge design for easier gripping. Corning™Centrifuge Tubes with CentriStar™ Caps leak-proof design comes with a revolutionary plug feature that virtually eliminates all seepage when used under recommended conditions.

Eppendorf™ Polypropylene DNA LoBind Polypropylene Microcentrifuge Tube

Maximize sample recovery of nucleic acids by significantly reducing sample-to-surface binding with these tubes. Eppendorf™ Polypropylene DNA LoBind Tubes are ideal for sample preparation and long-term storage.

Fisherbrand™ Mini Plate Spinner Centrifuge

Specifically designed for quick and easy centrifugation of samples in PCR plates or microplates

Thermo Scientific™ Nalgene™ Oak Ridge High-Speed Polycarbonate Centrifuge Tubes

Perform a plethora of applications thanks to the excellent mechanical strength of Thermo Scientific™ Nalgene™ Oak Ridge High-Speed Polycarbonate Centrifuge Tubes.

Fisherbrand™ Premium Microcentrifuge Tubes: 2.0mL

Flat-top snap caps provide a safe, liquid-tight, reliable seal even with prolonged boiling

Greiner Bio-One 2mL Polypropylene Microcentrifuge Tubes

For single use only. Greiner Bio-One Cell 2mL Polypropylene Microcentrifuge Tubes are graduated and free of heavy metal.

Thermo Scientific™ Megafuge 40R Bioliner Clinical Centrifuge Package

Process 40% more 50mL conical tubes or 100% more blood tubes.

Thermo Scientific™ Round Buckets for 4-Place Swinging Bucket Rotor

4 x 100mL capacity buckets fit the Thermo Scientific Swinging 4-place rotor (75-007-591)

Thermo Scientific™ Megafuge 16R M-20 Centrifuge Package

Offers exceptional capacity, ergonomics and value.

Sarstedt™ Tube, 50mL

Sarstedt™ Tube, 50mL feature a screw cap, a conical base, and printed writing space and graduations.

  spinner