missing translation for 'onlineSavingsMsg'
Learn More
Learn More
METTLER TOLEDO™ Ion Selective Electrodes (ISE)
A selection of ISE probes for detecting concentration of various free ions.
Marca: METTLER TOLEDO™ 51340263
490.00 EUR valid until 2025-12-31
Use promo code "25339" to get your promotional price.
Este artículo no se puede devolver.
Vea la política de devoluciones
Descripción
- Prior to first use, rinse the electrode with distilled water and soak it in the appropriate standard for 24-48 hours and then fill with reference electrolyte (refer to table above)
- ISA (Ionic strength adjuster) solution required to be added to all calibration standards and samples prior to measurement for accurate results
- Refer to electrode user manual for appropriate ratio of ISA solution to sample volume
- Add filling solution each day before using the electrode (at least 2.5 cm above sample level in beaker)
- Be sure to screw cap tightly immediately after use
- The filling solution inside the electrode should not be allowed to evaporate, as crystallization will result
- For storage between measurements and up to three days, store in the appropriate standard
- For long-term storage, refer to specific ISE electrode user manual
- Sensing membrane will wear over time; each membrane can last about six months with normal use, but actual lifespan will depend on the type of samples that are being measured
- Competing ion interferences are common. Refer to ISE electrode user manual for potential interferences
- Compatible with METTLER TOLEDO SevenExcellence Benchtop, Seven2Go, and SevenGo Portable
- Compatible with InMotion Autosampler to automate measurement and cleaning of up to 303 samples
Especificaciones
| S7 BNC Cable | |
| NH4Cl/NH4OH (ISA) | |
| 120 mm | |
| 8 to 11 | |
| 0°C to 80°C | |
| 1.0 to 1 x 10-7 mol/L |
| Required Solutions: Reference Electrolyte - 0.1 mol/L NH4Cl Ionic Strength Adjuster - NH4Cl /NH4OH | |
| 4.75 in. | |
| Epoxy | |
| perfectION DX223-Na+ Half-Cell Electrode | |
| Ion Selective Electrode | |
| Sodium |
Corrección del contenido de un producto
Proporcione sus comentarios sobre el contenido del producto rellenando el siguiente formulario.
Título del producto
METTLER TOLEDO™ Ion Selective Electrodes (ISE) > DX223-Na+ ISE Half-Cell
¿Detecta una oportunidad de mejora?Comparta una corrección de contenido
