PCR Tubes

Eppendorf™ PCR Tubes

Ensure efficient heat transfer to the sample with these tubes, thanks to their thin, even wall thickness and smooth wall surface. Eppendorf™ PCR Tubes are easy to open, but provide tight sealing to prevent evaporation in PCR. X500 Tubes PCR thin-walled 0.5mL (pack of 500)

Axygen™ PCR Tubes with 0.5mL Flat Cap

Thin and consistent wall thickness for precise thermal transfer X10000 PCR tube Axygen thin wall with flat cappolypropylene blue 0.5mL (pack of 10K)

Thermo Scientific™ 0.2 mL Strip Tubes

Optimize PCR and qPCR with these 0.2 mL strip tubes, available as 8 tubes per strip in several colors or 12 tubes per strip. X250 STRIP 8X0,2ML GREEN

Thermo Scientific™ Microtiter Tubes and Racks

Seal microtiter tubes tightly for storage with these polyethylene plug strips for use with 1.2mL MCT Titertube Racks.

X1000 Microtiter Tube 1.2ml, PP, Natural, Non Sterile, w/o cap, bagged/100

Invitrogen™ RNase-free Microfuge Tubes, 2.0mL

Tolerate wide temperature range X500 RNASE-FREE MICROFUGE TUBES (2.0ML) STORE ATroom temperature

Axygen™ PCR Tubes with Flat Cap, 0.2mL

Designed to fit standard 96-well blocks. Axygen™ PCR Tubes with Flat Cap, 0.2m are constructed of non-sterile polypropylene. Each conical tube features thin and consistent wall thickness. Tight-fitting cap secures contents and prevents evaporation. Available in an assortment of colors. X1000 0,2ML PCR TUBE +FLAT CAP GR

Eppendorf™ PCR Tube Strips, 0.1mL

Designed for single use PCR applications. Eppendorf™ PCR Tube Strips provide tight sealing to prevent evaporation in PCR, yet are easy to open. They ensure efficient heat transfer to the sample by virtue of their thin, even wall thickness and smooth wall surface. X120 PCR 8 TUBE STRIPS 0,1ML

Fisherbrand™ 0.2mL PCR Tubes

With integral “snap shut” cap X1000 Fisherbrand PCR tube 0.2ml, flat cap, PP, yellow - FB-0620/Y

Axygen™ PCR Tubes with 0.2mL Dome Cap

Thin and consistent wall thickness for precise thermal transfer X1000 0,2ML PCR TUBE DOME CAP

Axygen™ 8-Strip PCR Tubes, 0.2mL

Available in a variety of colors for easy sample identification. Axygen™ 8-Strip PCR Tubes, 0.2mL are constructed of sturdy polypropylene. Each non-sterile, conical tube features thin and consistent wall thickness. Sold with flat or domed caps to prevent sample loss or without caps. X125 0,2ML 8 STRIP TUBE ORANGE

Thermo Scientific™ PCR Tubes and Plates

Efficiently perform applications with these PCR tubes and plates, molded from 100% virgin polypropylene. PCR-Gefässe, 0,2 ml, mit gewölbten Deckel,

Invitrogen™ RNase-free Microfuge Tubes, 1.5mL

Autoclavable X500 RNASE-FREE MICROFUGE TUBES (1.5ML) STORE ATroom temperature

Invitrogen™ Thin-walled, Frosted Lid, RNase-free PCR Tubes, 0.2mL

Easy label cap 0.2 ML FROSTED LID PCR TUBES2 ml), 1000 tubes

Applied Biosystems™ MicroAmp™ 8-Tube Strip, 0.2mL

Tubes precisely fit industry standard well spacing 125 Strips 200UL MICROAMP 8-TUBE STRIP,0.2ML STOREat room temperature

Fisherbrand™ 0.2mL PCR Tube Strips

Ideal for use in 0.2mL, 96-well V-bottom thermal cyclers X250 Fisherbrand PCR 8-tubes 0.2ml strip w/domed cap, PP, red - FB-0266/R

Thermo Scientific™ Low Profile Strip Tubes & Caps

Low profile strip tubes for PCR and qPCR applications. X250 STRIP 8X0,2ML LP PLA ASSORTED(VE=250Strips)

Applied Biosystems™ MicroAmp™ 8-Cap Strip

Designed to fit on MicroAmp reaction tubes, tube strips, and 96-well plates X8 MICROAMP, 8-CAP STRIP

BRAND™ White PCR 8-Strip Tubes

Designed specifically to optimize results when performing quantitative Real Time PCR (qPCR) X125 PCR-tube, strip of 8, without cap0,2ml, white, for qPCR

Applied Biosystems™ GeneAmp™ Thin-Walled Reaction Tube, with Domed Cap, 0.5mL, Autoclaved

Autoclaved to provide clean, controlled start AUTOCLAVED THIN-WALLED RXNCap, 0.5 ml, Autoclaved, 1000 tubes

Thermo Scientific™ 0.2 mL Individual Tubes

0.2 mL individual tubes with attached flat or dome snap shut caps, available in a variety of colors X1000 PCR TUBE 0,2ML FLAT ASSORTED(VE=1000Stck.)

Fisherbrand™ 0.5mL Flat-Cap PCR Tubes

With integral “snap shut” cap X1000 Fisherbrand PCR tube 0.5ml, flat cap, PP, blue - FB-0350/B

Thermo Scientific™ Low Profile Strip Tubes without Caps

Increase the efficiency of reactions with these low-profile strip tubes for PCR and qPCR applications. X120 STRIPS OF 8 LOW PROFILE TUBES

Invitrogen™ Conical Tubes, 15mL, Racked

RNase- and DNase-free and autoclavable 15 ML CONICAL TUBES (RACKED), 500 tubes

Eppendorf™ real-time PCR Tube Strips and Masterclear™ Cap Strips

All the benefits of white reflective wells in a PCR-tube format x120 Cap Strips, domed, 12-strip

Applied Biosystems™ MicroAmp™ Fast Reaction Tube with Cap, 0.1mL

Reduce PCR reaction time to as little as 25 minutes X1000 MICROAMP FAST REACTION TUBE WITH CAP, 0.1MLStore at room temperature

Thermo Scientific™ HotStart™ Storage Reaction Tubes

Eliminate tedious oil or wax overlays with the thin-walled Thermo Scientific™ HotStart™ Storage Reaction Tubes. X120 PCR-RÖR H.START 50 STR,W.B.2ML ,NS,FP480

Applied Biosystems™ MicroAmp™ Reaction Tube without Cap, 0.2mL

Optimally designed for precise PCR 200 UL MICROAMP, REACTION TUBE WITHOUT CAP 0.2MLStore at room temperature

Corning™ PCR Tubes

Manufactured from thin-walled polypropylene and designed for precise fit in heat blocks to optimize heat transfer. Corning™ PCR Tubes withstand forces up to 10,000 x g. X1000 PCR Tube, PP, 0.5ml, Natural, Attached FlatCap, Nonsterile, 250/bag

Corning™ Thermowell™ GOLD Polypropylene 8-Well Tube Strips

Thermowell™ GOLD tube strips fit automated equipment as well as the original manufacturers' tube strips X1250 PCR 8-Well tube Strip, Thermowell GOLD 0.2mL, PP, Natural, NonSterile, 125/bag

Thermo Scientific™ 0.5 mL Individual Tubes

Minimize sample loss with the “snap shut” lids on these individual 0.5mL tubes for PCR applications. X1000 PCR TUBE 0,5ML FLAT ASSORTED(VE=1000Stck.)

  spinner